Heavy Duty Compound

One of our Legacy Products used for over 20 years! HEAVY DUTY Clear Coat Compound revives paint and stores a high gloss finish to vehicles!

• Removes 1500-2000 Grit Sanding Marks
• High Gloss Finish 
• Revives Oxidized Paint
• Contains No Harsh Abrasives 

When using a Rotary: At the start: 800–1,500 rpm Towards the end: 1,800–2,000 rpm  

When using an Orbital: Lower to upper rotational speed range

Pair Up with Our Cut Foam Pad, Microfiber Pad, or Premium LambsWool Pad.

1 Use on a freshly cleaned surface (clay bar as needed) 

2 Shake the bottle and apply the polish to the polishing pad (3-4 small pea sized dots, or a thin line, around the pad) 

3 Using the cross-hatching method. Start by polishing a small section, at a low rotational speed while exerting strong pressure.

4 Take away the pressure in the final cycles and increase the speed of the polishing machine.

5 At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.

6 Once you have finished polishing, remove any residue with a clean microfiber towel..

7 Depending on the demands of the surface, a second stage may be performed