Amplify Ceramic Set - 3 in 1 Cut, Polish, & Ceramic Coating

Our new Premium Black Label product Amplify Ceramic SET is a 3 in 1, Cut, Polish & Ceramic Coating!! This is every detailers all in one, go to product! With Amplify Ceramic SET you can achieve 3 steps in your detailing process! 1st it will remove paint defects, marks & swirls, 2nd it will achieve a high gloss finish and 3rd it will seal the perfected surface with its Ceramic protection! It is Silicone & Filler Free and can also remove 3000 grit sanding marks!

It comes in a 16oz or 32oz bottle with a snap top for ease of use, and cleaner storage. Our bottles and labels also provide a grippy surface for those quick one hand grabs while applying polish to your polishing pad. 

Directions:

When using a Rotary: At the start: 1,250–1,500 rpm Towards the end: 500–800 rpm  

When using an Orbital: Medium to lower rotational speed range  

When using by hand: Use Polish Applicator or Plush MicroFiber Towel apply medium pressure in circular motions.

Tip: Pair Up with a Medium Cut Pad, Soft Cut Pad or Wax Foam Pad 

1. Use on a freshly cleaned surface (clay bar as needed) 

2. Shake the bottle before use and apply the polish to the Medium Cut Foam Pad.

(3-4 small pea sized dots, or a thin line, around the pad) 

3. For best results, we recommend using a rotary or orbital polishing machine with the cross-hatching method.

4. While polishing, exert moderately strong pressure to begin with, using the medium rotational speed range of the polishing machine. Reduce the pressure and the rotational speed during the final cycles.

5. At first, the polish will seem a little greasy and should be worked in until only a slightly transparent/oily film is visible.

6. Following application remove any residual polish with a clean microfiber towel, lightly without applying little if any pressure to the surface immediately after the section is completed. Not doing so can result in extreme difficulties with residue removal.

7. Depending on the demands of the surface, reapply using a Foam Pad in order to achieve an even better finish.

TECH DATA SHEET